home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19941221-19950208
/
000160_news@columbia.edu_Thu Jan 12 06:59:22 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-07-31
|
3KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA02985
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Thu, 12 Jan 1995 19:34:38 -0500
Received: by apakabar.cc.columbia.edu id AA21034
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Thu, 12 Jan 1995 19:34:36 -0500
Path: news.columbia.edu!panix!news.mathworks.com!hookup!swrinde!howland.reston.ans.net!vixen.cso.uiuc.edu!usenet.ucs.indiana.edu!bronze.ucs.indiana.edu!jawarric
From: jawarric@ucs.indiana.edu (Jeff Warrick)
Newsgroups: comp.protocols.kermit.misc
Subject: ** Kermit Quits after 1 Error: Why?
Date: 12 Jan 1995 06:59:22 GMT
Organization: Indiana University
Lines: 39
Message-Id: <3f2k0a$a8v@usenet.ucs.indiana.edu>
Nntp-Posting-Host: silver.ucs.indiana.edu
X-Newsreader: TIN [version 1.2 PL2]
Apparently-To: kermit.misc@watsun.cc.columbia.edu
I have been playing around, and I still can't figure out why kermit quits
after 1 error has occurred. The error is usually a 'Bad Block' (nothing
important). I would greatly appreciate any advice, since I can't even
transfer big files because of this. Here is the 'show' from my kermit:
C-Kermit 5A(189), 30 June 93, SCO ODT 3.0
Communications Parameters:
Line: /dev/tty, speed: 0, mode: remote, modem: direct
Parity: none, duplex: full, flow: xon/xoff, handshake: none
Protocol Parameters: Send Receive
Timeout (used= 7): 7 10 Server Timeout: 0
Padding: 0 0 Block Check: 3
Pad Character: 0 0 Delay: 2
Packet Start: 1 1 Max Retries: 10
Packet End: 13 13
Packet Length: 900 900
Maximum Length: 9024 9024 Window Size: 10 set, 0 used
Buffer Size: 9065 9065 Locking-Shift: enabled, not used
File parameters: Attributes: on
Names: literal Debugging Log: none
Type: binary Packet Log: none Longest filename: 512
Collide: rename Session Log: none Longest pathname: 255
Display: serial Transaction Log: none
File Byte Size: 8, Incomplete Files: discard, Init file: .kermrc
The packet-length, window size, block check are all the same on my
computer and I get great transfer rate. I'm using a GW2000 computer,
Crosstalk for Windows, and a 14.4 modem. The only other settings I can
play with on Crosstalk are prefixes, and I don't want to play with them.
Any help would be greatly appreciated!
Thanks so much!